[Hardware] 6 buttons stick

hu, cd, scd, acd, supergrafx discussions.
Post Reply
User avatar
MooZ
Site Admin
Posts: 408
Joined: Sun Jun 22, 2008 3:19 pm
Location: Lvl 3
Contact:

[Hardware] 6 buttons stick

Post by MooZ »

Yo!

I'm trying to build a 6 buttons stick using Emanuele Bettidi schematic. I remade it under Eagle (link).
Here's an image export is you don't have Eagle (link).
I'll try to make the circuit this week. But it promises to be painful as the original board has 2 layers (hires phoso)

Please let me know if I made any mistakes.
User avatar
Gravis
Kitten Blaster
Posts: 79
Joined: Sun Jun 22, 2008 3:52 pm
Location: Deadman Wonderland

Re: [Hardware] 6 buttons stick

Post by Gravis »

you could simplify the circuit by just using a microcontroller to do everything directly. it would be a much simpler design and cheaper.
User avatar
MooZ
Site Admin
Posts: 408
Joined: Sun Jun 22, 2008 3:19 pm
Location: Lvl 3
Contact:

Re: [Hardware] 6 buttons stick

Post by MooZ »

I don't want to write code that emulates a dump ttl chip that may cost 20 cents :)

Anyway, I found some errors in the schematics. I also did a board layout. It's not the final version. The 2nd layer is ugly and some paths can be optimized. But it will be enough to run some tests. Image
User avatar
MooZ
Site Admin
Posts: 408
Joined: Sun Jun 22, 2008 3:19 pm
Location: Lvl 3
Contact:

Re: [Hardware] 6 buttons stick

Post by MooZ »

Here's the version without auto-fire. Image

I'll try to solder a prototype in the next weeks.
User avatar
MooZ
Site Admin
Posts: 408
Joined: Sun Jun 22, 2008 3:19 pm
Location: Lvl 3
Contact:

Re: [Hardware] 6 buttons stick

Post by MooZ »

Here's a little 3d render of the card I did with this online 3D gerber viewer.
Image Image
User avatar
MottZilla
Posts: 4
Joined: Sat Sep 20, 2008 8:40 pm

Re: [Hardware] 6 buttons stick

Post by MottZilla »

Looks nice. Did you ever put it into an arcade stick?
User avatar
MooZ
Site Admin
Posts: 408
Joined: Sun Jun 22, 2008 3:19 pm
Location: Lvl 3
Contact:

Re: [Hardware] 6 buttons stick

Post by MooZ »

Not yet. I received the board last week. I have everything except the enclosure :|
Maybe I'll take the lazy path and buy one.
User avatar
MooZ
Site Admin
Posts: 408
Joined: Sun Jun 22, 2008 3:19 pm
Location: Lvl 3
Contact:

Re: [Hardware] 6 buttons stick

Post by MooZ »

I finally started working on the case.
Image
User avatar
MooZ
Site Admin
Posts: 408
Joined: Sun Jun 22, 2008 3:19 pm
Location: Lvl 3
Contact:

Re: [Hardware] 6 buttons stick

Post by MooZ »

I can't count to 6...
Image
User avatar
MooZ
Site Admin
Posts: 408
Joined: Sun Jun 22, 2008 3:19 pm
Location: Lvl 3
Contact:

Re: [Hardware] 6 buttons stick

Post by MooZ »

I was at a bbq this week-end. I snatched a japanese hardware hacking book and took some photos with my cell phone :)
It's basically an article about how to make a 6 buttons arcade stick for the PC Engine.
Attachments
Page3.jpg
(1.02 MiB) Not downloaded yet
Page2.jpg
(1.16 MiB) Not downloaded yet
Page1.jpg
(1.37 MiB) Not downloaded yet
Cover.jpg
Magazine cover
(318.24 KiB) Not downloaded yet
Post Reply