SF2 mapper...

hu, cd, scd, acd, supergrafx discussions.
Post Reply
tomaitheous
Posts: 88
Joined: Mon Jun 23, 2008 1:58 pm

SF2 mapper...

Post by tomaitheous »

extended! Version 2.0.

Image

Writing to $xxx0-$xxxF in either bank 0 or 1 selects a 512k segment to be mapped into the upper 512k of the lower 1megabyte memory range. I split the 64megabit memory range across two chips since my programmer only handles up to 40 pin chips :cry: Plus, I doubt I could find a 64Mx8bit compatible rom.

Street Fighter 2 uses $xxx0-$xxx3 of Bank 0, so it should work fine with that rom. /Y0 and /Y1 of the '139 go to /CS of the lower 512k separate rom.
User avatar
MooZ
Site Admin
Posts: 407
Joined: Sun Jun 22, 2008 3:19 pm
Location: Lvl 3
Contact:

Re: SF2 mapper...

Post by MooZ »

That's cool!
By the way, what programmer are you using? Do you have some photos of the board ?
tomaitheous
Posts: 88
Joined: Mon Jun 23, 2008 1:58 pm

Re: SF2 mapper...

Post by tomaitheous »

I have the Batronix 40pin usb programmer. Their cheapest model ($150). No photos. I extended the Turborom board. I still need to purchase the parts to build the mapper.
Post Reply